Step
Incoming delivery check
We unpack all parts, check completeness against the order and document any transport damage. What is not found now cannot be claimed with the manufacturer later.
Kitchen installation
We install kitchens by Chornbach, Bauhaus, Oresi, IKEA, XXXLutz, Möbelix, DanKüchen and other manufacturers — for each of them we have completed official training directly at the manufacturer. We hand over the kitchen with a written protocol — every appliance connected, tested and functional. In 10 years of practice we have completed over 300 projects.
From the first cabinet to the protocol
Indicatively from 8,000 CZK — the exact price after measurement
Manufacturer certifications
IKEA, Bauhaus, DanKüchen, Möbelix, XXXLutz, Oresi and more.
Handover protocol
Your document for a possible warranty claim with the manufacturer.
Fixed price in writing
No surprises in the budget after completion.
300+kitchens completed
What you get with us — and what you risk without us
Most installation firms deal only with the cabinets. We deal with the whole kitchen line — including everything that is behind it in the wall.
Why us
Manufacturer certifications
Official training at IKEA, Bauhaus, DanKüchen, Möbelix and XXXLutz. We know the specifics of every brand.
Handover protocol as standard
A record of what was installed. Without it a manufacturer warranty claim will not go through.
Fixed price in writing
What is in the quote is on the invoice. No on-site surcharges, no surprises.
The date does not shift
The date we agree on is the handover date. No „we will finish next time in 14 days“.
From delivery to a finished kitchen
How it works
- Step
Cabinet assembly
Joining, anchoring and levelling of base, wall and tall cabinets — in the order that guarantees stability of the whole assembly.
- Step
Worktop fitting
Cut-outs for the hob and sink are routed to size. Joints between worktop sections are sealed and protected against moisture.
- Step
Appliance installation
Oven, hob, dishwasher, extractor and fridge — we build them in, connect to electricity, water and drainage and verify the tightness of all connections.
- Step
Adjusting doors and drawers
Final adjustment of every moving part to the tolerances of the specific manufacturer — not by eye.
- Step
Handover with protocol
Functional test of the whole assembly and issue of the handover protocol — your document for any warranty claim with the manufacturer.
Non-binding. We reply within 24 hours.
Installation that lasts for decades
What exactly we do
10+years of installation experience
Why the installation matters
A kitchen can be assembled badly. You close the doors, push in the drawers, and at first glance everything looks fine. But three months later one door starts rubbing against another, the worktop by the sink swells slightly, and the dishwasher catches on the cabinet next to it when opening.
From cabinets to the protocol
Before starting, we check the delivery — what is not found now cannot be claimed with the manufacturer later. Then we proceed systematically: cabinets, worktop, appliances, final adjustment.
We connect the appliances and verify each connection for tightness before mounting the surrounding fronts — a leak you no longer see is more expensive than one you catch right away.
Every manufacturer has different installation tolerances, different hinge systems and different recommendations for anchoring tall cabinets. That is why we install by specific brand — not by eye.
Chornbach, Bauhaus, Oresi, IKEA, XXXLutz, Möbelix, DanKüchen — we have completed official training for each.
What we hand over
A functional kitchen line with everything it includes — and a handover protocol as the basis for a possible warranty claim.
- Assembled line with adjusted doors and drawers
- Worktop with precise cut-outs and sealed joints
- Connected and tested appliances — oven, hob, dishwasher, extractor, fridge
Without the protocol you cannot claim a warranty with the manufacturer — that is why we issue it automatically with every job.
The date we agree on is the handover date — the deadline does not shift.
What clients say about us
Verified reviews from clients for whom we installed kitchens by IKEA, Bauhaus, Möbelix and other brands in Prague.
Reviews
Everything you need to know before the installation
We collected the most common questions from inquiries over the last 10 years. If yours is not there, write us — we reply within 24 hours.
FAQ
We regularly install IKEA, Bauhaus, Möbelix, XXXLutz, Oresi, DanKüchen, Hornbach and Sykora. For each of them we have completed official training directly at the manufacturer — we know the specifics of installation tolerances, hinge systems and anchoring methods.
Do you have a kitchen from a different brand? Write us — we probably install that one too.
The indicative price starts at 8,000 CZK for smaller, straight runs. The actual price depends on the length of the run, the number of appliances, the type of anchoring (panel vs. brick wall), the worktop and the need for preparation work.
We set the final amount after a site visit or after the complete project is handed over, and we deliver it in writing. What is in the quote is on the invoice — no on-site surcharges.
A standard straight IKEA kitchen: 2–3 working days. A larger or complex layout (corner, with an island, more appliances): 4–5 days. If the order also includes utility preparation, the total time is 10–14 days including all steps.
The agreed date is the handover date — not the date when the work starts and finishes „sometime later“.
The handover protocol is a written document describing what was installed, in what condition and with which appliances. We issue it automatically with every job.
Without this protocol you cannot claim a warranty with the kitchen manufacturer or the appliance supplier — the manufacturer needs proof that the installation was performed according to its rules.
Before starting the installation we check the complete delivery — all parts against the order and their state after transport. If we find damage or a missing part, we document it and hand you the basis for a claim with the manufacturer or carrier.
What is not found now cannot be claimed later. That is why the incoming check is part of every installation.
Yes — connection of built-in appliances (oven, hob, dishwasher, extractor, fridge) is part of the standard installation. Each connection is tested for tightness and function before we mount the surrounding fronts.
Gas appliances (gas hob) — the connection is performed by a gas fitter with TIČR authorisation, whom we organise within the schedule.
We adjust the installation date to the delivery. The optimum is to plan the installation 5–7 days after delivery — that gives us time to check the delivery and, if needed, file a claim before the work starts.
By prior agreement yes, at the standard rate. We plan working weekends in advance for logistics, and in apartment buildings we respect quiet hours and noise limits.
For the installation work we provide a 24-month warranty from the day of handover. The warranty covers the quality of anchoring, adjustment, joints and connections.
The warranty for the kitchen itself and the appliances is given by the manufacturer — the handover protocol is its precondition.
Yes, we install on a standalone basis as well. We recommend at least a short site inspection before ordering the kitchen — so we can flag any clashes with utilities, ceiling height or wall crookedness. You avoid the situation where goods arrive and not everything fits.
Prague and Central Bohemia. By arrangement we work across the Czech Republic and in eastern and southern Germany (Bavaria, Saxony, etc.). Travel is itemised transparently in the quote.
Minor adjustment after a few weeks of use is normal — materials settle, fittings loosen. If it falls within the warranty period, we come back for free to readjust doors, drawers and the worktop.
If a structural problem appears (collapsed cabinet, cracked worktop joint), we document and resolve it within the warranty.
Photos of our projects
Real shots from our installations — kitchens in Prague handed over with a protocol.
Gallery
Other services
What we do
.Kitchen measuring and design
We come to you, measure the space and check the actual condition of electrical, water and drainage connections. We design the solution based on what we see on site — not from an office.
More about measuring- .
Electrical, water and drainage preparation
We move sockets, water and drainage exactly to where the kitchen plan requires. Electrician and plumber in one team, one date, fixed price.
More about utility prep - .
Worktop installation and replacement
Replacement and installation of worktops in laminate, veneer, solid wood, compact laminate and artificial stone. Precise routing, invisible joints, no kitchen disassembly.
More about worktops
